how to clean a canon ink absorber youtube

Most Canon printers have an ink-absorber installed for the purpose of absorbing excess ink that stores while printing or cleaning print-head. The error "Ink Absorber Full" in Canon Pixma printers will occur when the absorber pads are saturated. Your Canon printer may act differently beyond showing any error on the screen. The printers that do not have a screen will usually display some flashing lights that you could check on about in the device manual or consult with engineers through Canon technical support phone number.

Clean Ink Absorber Resolve Error in Canon Pixma

Troubleshooting this error could be harder for some users, despite having instructions available. Therefore, I suggest those users contact Canon printer technical support phone number for better guidance from the professional technicians only. To proceed further with the diagnosis-

Put on some plastic gloves, take a big bowl and fill it with some warm water and add some shampoo in it.
Check in the manuals and open the ink-cartridge compartment, which can be in the front or rear based on different types of Canon printer models.
After opening the ink-cartridge compartment door, wait until the printer is silent and has all cartridges moved in aside.
When your printer is silent and has cartridges in a corner, unplug the power cord.
Now look for a black-color rubber frame located under ink-cartridges, this component in Canon printers contains the absorber pads.
Carefully pull the rubber frame out of the printer device and detach all absorber pads.
Now soak the pads in the bowl full of soapy warm water and clean the ink from pads by rubbing them carefully. When the water gets dirty while washing off the saturated ink, get clean & shampoo warm-water again in the bowl and repeat the cleaning process until the pads are clean.
Now squeeze the absorber pads until excess water is removed without hurting them, then take few paper towels and place pads on them to dry.
Wait for a few hours and change the towels if they get saturated during the process.
When the absorber pads are fully dry, place them in the rubber frame and install back in the Canon printer.
Press and hold the power button on the printer while connecting the power cord and release when the printer comes on. Wait for ten seconds and press the power button on the printer again to reset the internal memory and remove the error code from the screen.

The following method will help you overcome Canon Pixma printer error code "Ink Absorber Full". For additional help and troubleshooting, contact official Canon support.

Post Views: 9,021

Tagged With: canon pixma printer Clean Ink Absorber Error in Canon Pixma Printers Resolve Error in Canon